본문 바로가기 주메뉴 바로가기

APT

home > 재료소개(Powder/Wire) > Powder-Carbide >APT

Ultimate wear protection

Resisting wear is one of the greatest challenges for moving components. To help fight high- and low-temperature wear, we offer a
complete line of spray dried, cast and sintered carbide powder solutions. See our APT, chromium carbide and tungsten carbide
powder formulas below.

Powder Name&Composition Chemistry & Size DIAMETER Safety Data Sheet (SDS)
CRC-410

CrC-30NiCr

(Activated)		 Ni 8.0

C 4.0

Cr balance

-53 µm/+16 µm
  • Atomized, fully alloyed CrC- NiCr powder
  • Improved DE and stress properties over traditional blended CrC-NiCr
  • Excellent for high- temperature cavitation, abrasion and sliding wear
  • Good hot gas and corrosion resistance
  • Useful up to 1600°F / 871°C
 CRC-410 (132KB)
CRC-410-1

CrC-30NiCr

(Activated)		 Ni 8.0

C 4.0

Cr balance

-45 µm/+11 µm
  • Atomized CrC-Ni-Cr powder similar to CRC-410
  • Improved DE and stress properties over traditional blended CrC-NiCr
  • Excellent for high- temperature cavitation, abrasion and sliding wear
  • Good hot gas and corrosion resistance
  • Useful up to 1600°F / 871°C
 CRC-410-1 (132KB)
CRC-425

CrC-40NiCr

(Activated)		 Ni 21.5

C 3.4

Cr balance

-53 µm/+16 µm
  • Atomized CrC-Ni-Cr powder similar to CRC-410
  • Improved ductility and better toughness
  • Slightly lower hardness
 CRC-425 (132KB)
W-121

WC-36Cr-20Co

(Activated)		 Cr 34.0

Co 20.0

C 4.0

W balance

-45 µm/+16 µm
  • Atomized WC-CoCr powder
  • Excellent DE (55-65%), flow -and spray-ability
  • Candidate for hard chrome replacement
  • Good sliding wear and mating properties
 W-121 (133KB)
W-121

WC-36Cr-20Co

(Activated)		 Cr 34.0

Co 20.0

C 4.0

W balance

-53 µm/+22 µm
  • Atomized WC-CoCr powder
    • Excellent DE (55-65%), flow - and spray-ability
  • Candidate for hard chrome replacement
  • Good sliding wear and mating properties
 W-121 (133KB)
W-124

WC-48Cr-12Co

(Activated)		 Cr 48.0

Co 12.0

C 4.0

W balance

-45 µm/+16 µm
  • Atomized WC-CoCr powder
  • Designed as a superior alternative to traditional WC alloys
  • Good toughness and corrosion resistance
  • Excellent DE (55-65%), flow- and spray-ability
  • Superior wear resistant properties
  • Candidate for hard chrome replacement
 W-121 (133KB)
W-129

WC-45Cr-18Ni

(Activated)		 Cr 48.0

Co 12.0

C 4.0

W balance

-45 µm/+16 µm
  • Atomized WC NiCr powder
  • Excellent DE (55-65%), flow and spray-ability
  • Candidate for hard chrome replacement
  • Good sliding wear and mating properties
 W-129 (134KB)